 |
|||||||||||||||||||||||||||||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||||
 |
 |
 |
 |
 |
 |
|
 |
 |
|
 |
|||||||||||||||||||||||||||||||||||
 |
 |
||||||||||||||||||||||||||||||||||||||||||||
 |
PA95-9x3W The PA95 range of LED clusters are based on a 95mm dia MCPCB and comprise of 9 high power 3W LED emitters configured in series. A choice of colours are available including Cool white, Neutral white and Warm white with an optional RGB version A typical output of 1170 lumens is quoted for cool white at the max drive curent of 700mA. A choice of optics is also available including a single piece 9-cell for ease of assembly The LEDs must be driven from a constant current source and used with approriate secondary heatsinking to provide reliable thermal management. |
|
 |
||||||||||||||||||||||||||||||||||||||||||
 |
 |
||||||||||||||||||||||||||||||||||||||||||||
| PA95-9x3-O The PA95-O range of LED clusters are based on a 95mm dia MCPCB with optic and comprise of 9 high power 3W LED emitters configured in series. A choice of colours are available including Cool white, Neutral white and Warm white with an optional RGB version. A typical output of 1170 lumens is quoted for cool white at the max drive curent of 700mA. The single piece 9-cell optic is available in 10° and 25° beam angle. The LEDs must be driven from a constant current source and used with approriate secondary heatsinking to provide reliable thermal management. |
|||||||||||||||||||||||||||||||||||||||||||||
| SFNMC Series The SFNMC series comprise of 6 high power 1W LED emitters mounted on an 81mm diameter MCPCB. Configured in series with a Vf typ of 22v (InGaN) the LEDs must be driven from a constant current source and used with approriate secondary heatsinking to provide reliable thermal management. A typical output of 450 lumens is quoted for cool white at the max drive curent of 350mA. A range of configurations are available in a choice of colours. |
|||||||||||||||||||||||||||||||||||||||||||||
| Cree® XLamp® XR Series LED Tri-mod Using high power emitters from the latest XLamp® XR LEDs family the trimod MCPCB measures 45mm diameter. A choice of colours are available including cool white and warm white along with a full colour RGB version. The assembly is designed to accept a range of secondary optics to produce directivity to suit the application. Devices are fully selected for intensity and colour co-ordinates. Use in conjunction with constant current LED drivers. |
|||||||||||||||||||||||||||||||||||||||||||||
| SFNMR RGB Array The SFNMR comprises of 3 high power RGB emitters configured in series and mounted on 46.5mm MCPCB for high intensity full colour applications. The device directivity is quoted at 120° where secondary optics are available for medium and narrow beam angles Use in conjunction with constant current driver/controllers and appropriate thermal management. |
|||||||||||||||||||||||||||||||||||||||||||||
| PO166 Tri-mod The PO166 universal MCPCB is designed for Cree XL and XR series high power LED emitters and accepts the PO158 colour mix optic. Assemblies may be clustered into large arrays and linear formats to suit a wide range of lighting applications. A self adhesive thermal gasket pre-cut to suit the PO166 MCPCB is also available. |
|||||||||||||||||||||||||||||||||||||||||||||
| PA8090 RGB Module We offer bespoke LED assemblies using high powered emitters.The PA8090 is a full colour RGB assembly utilising the Ligitek LGXRGB-501E with on-board constant current regulation. Operation is from 24v dc and colour control is achieved by PWM to each of the 3 channels to produce the required mix. The MCPCB must be used in conjunction with secondary heat sinks to provide reliable thermal management. |
|||||||||||||||||||||||||||||||||||||||||||||
 |
 |
||||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||||
