A choice of colours is available including an RGB version in three beam angles 10º, 38º and 60º. Modules are rated at 500mA and cool white types achieve in excess of 130 lumens. White and warm white are ranked by CCT in ºK.

High power modules must be used in conjunction with secondary heat sinks for reliable operation and effective lumen maintenance.

This compact module may be fixed directly through holes in the 37mm flange, the lens diameter is 27mm and the modules profile is 20mm. A choice of colours is available along with two beam angle15° or 25°.

Units are rated to IP67 suitable for outdoor applications and operation is by low voltage 350mA current limiting power supply.

The housing flange measures 37mm diameter with a height of 22mm and a choice of 15° or 25° angle is available.

Units are rated to IP67 and a full range of colours are supported. Operation is by low voltage 350mA current limiting power supply.

The housing flange measures 37mm with a low profile 10.5mm height. Illumination angle is 120°.

A full range of colours are supported. Operation is by low voltage 350mA current limiting power supply.

PC22-01 Series
ThePA22-01 series high power module is an 21.5mm diameter module containing 1x 1W emitters with optic.

A range of colours are offered and a choice of optics to provide the beam angle to suit the application.

This high power module must be used in conjunction with secondary heat sinking and appropriate thermal management for reliable operation.

Use with a constant current 350mA LED driver.

SFNMP Series
SFNMP series Power Flux modules utilise the 1W lambertian emitter mounted on MCPCB and incorporate a 25° collimator lens to provide a high intensity beam of light.

A full range of colours are supported including White and Warm White for general lighting applications.

Modules are rated at 350mA and can acheive in excess of 40 lumens.

SFNMP Series P-Flux With Optics PDF

A range of colours are offered and a choice of optics to provide the beam angle to suit the application.

This high power module must be used in conjunction with secondary heat sinking and appropriate thermal management for reliable operation. Use with a constant current 350mA LED driver.

A number of series/parallel configurations are available in all colours including a full colour RGB version in 3 or 4 chip.

White emitters are ranked for CCT colour temperature to ensure warm white or cool white consistency.

With an integrated 50mm lens for directivity, three illumination patterns are available 10°, 25° and 40°.

This unit must be used in conjunction with constant current source 350mA.

A range of colours including RGB version may be specified.

A range of colours are available including white and warm white in a choice of beam angles.

Use in conjunction with constant current LED driver LD-CH3503AF.

SYKM50-W03 Tri-Spot PDF

A range of colours are offered and a choice of optics to provide the beam angle to suit the application.

Applications include downlighting and task lighting.

This high power module must be used in conjunction with secondary heat sinking and appropriate thermal management for reliable operation. Use with a constant current 350mA LED driver.

High Power Spotlight

From our range of High performance high power LED lamps we offer a range of LED spotlight assemblies utilising 350mA 1W emitters.

The PA50HP-25 series contains three integral 25° lenses and is available in a spectrum of colours including a full colour RGB version. Output for White is quoted at 270lumens @ 1metre.          

To be used in conjunction with a 350mA constant current transformer and secondary heat sinking.