 |
|||||||||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||||||||||||||
 |
|||||||||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
||||||||||||||||||
 |
 |
||||||||||||||||||||||||
 |
PTDLDCC RGB Controller The PTDLDCC controller contains an integrated power supply with 3 channel outputs designed to drive high power RGB LEDs. Input voltage range is from 110v to 240vac and the controller can drive up to 9 LEDs in series per channel at 350mA constant current with PWM dimming. Control is via IR control with easy to operate hand-held remote. |
 |
 |
||||||||||||||||||||||
 |
 |
||||||||||||||||||||||||
| PA6045 RGB Control Module This simple and effective module is designed for LED colour change applications and provides over 20 pre-programmed effects. The module provides the user with the flexibility to set colour schemes and programs are automatically stored in the NVM. The 3 channel mosfet outputs can handle drive currents up to 20A current at 48v. Connection is via screw terminal block. |
 |
||||||||||||||||||||||||
| Cyclic Timer Driver PA111-12v Designed for basic timed switching the PA111-12v PCB comprises of a cyclic timer with a relay output. Operation is from 12v DC and the On/Off times may be set by adjusting the 2 on board potentiometers. Timing may be adjusted from 50 secs to a maximum of 3 mins and the relay contacts are SPCO rated at 5A. A facility to connect remote potentiometers is also provided. |
 |
||||||||||||||||||||||||
| DigiLED Controller This controller is ideal for lighting schemes where a choice of pre-programmed colour options is required along with the facility to manually set a static colour. The 6 position selector provides: Manual Mode Static Magenta Static Aquamarine Bold Colour Cycle Pastel Colour Cycle A speed control knob allows flexibility of cycle times. |
 |
||||||||||||||||||||||||
| ColourBus 200 Colour Bus 200 controller is ideal for small lighting schemes where a choice of pre-programmed colour options is required along with the facility to control the cycle speed and dim. The 12 position selector provides a choice of preloaded colour change and static programs. The controller may be fixed to a standard single gang back box which is connected to the power supply and optional booster card. |
 |
||||||||||||||||||||||||
| DLDC RGB Controller The DLDC basic 3-channel RGB controller provides 3 pre-programmed colour cycles and a manual overide for setting/dimming each LED colour. Use in conjunction with a 24v DC regulated power supply controllers may be synchronised with DLD slave units for larger installations. Options include a high power constant current version and Infrared remote control option. |
 |
||||||||||||||||||||||||
 |
 |
||||||||||||||||||||||||
 |
|||||||||||||||||||||||||
 |
|||||||||||||||||||||||||